Other Machinery

  • JCB 3185 Fastrac (Used)

    Avaiability: In Stock
  • 2013 Opico Quiet 595 Mobile Grain Dryer

    2013 Opico Quiet 595 mobile grain dryer

    12 tonne capacity

    Hours 1959

    Washed, oiled and barn stored each year

    1 owner from new

    Full auto grain temperature controlled

    PTO driven, LGP fuel

    Selling due to change in farm policy

    Serviced and ready to work

    Avaiability: In Stock
  • JP Engineering 8ft x 4ft Safety Cage (New)

    Galvanised and Safety Certified

    Avaiability: In Stock
  • JP Engineering 4ft x 4ft Safety Cage (New)

    Galvanised

    Safety Certified

    Avaiability: In Stock
  • Kidd Post Drivers (New)

    High Lift Post Drivers for mounting to loaders, diggers, large and small tractors. All hydraulic slew, telescopic, mast rake and tilt angle.

    [easy_media_download url="http://martinsupplies.co.uk/wp-content/uploads/2018/04/Post-Driver.compressed.pdf" text="Download PDF" force_dl="1"]
    Avaiability: In Stock
  • Kidd Float Wing (New)

    Float Wing Mulching Mower, for tillage field residues, open green space areas and animal field grass management. Standard features include overlapping blades, three-point linkage, with two, three, or four blade cutting option.

    Avaiability: In Stock
  • Kidd Bale Shredders (New)

    Bale Shredders 450 and 850 easily handles straw, haylage, clamp grass and maize silage. It’s compact but with surprising large capacity for 2 round bales up to 6ft diameter. Material can be directed to exactly where it is needed with less waste.

    Kidd has launched a new range of Bale Shredders to compliment the 450 & 850 Bale Shredder range. A new smaller and lighter range of Bale Shredders is now available.

    The 330 is the only machine on the market that can be factory built for Shredding or Twin Chopping. Can be converted by a distributor. The shorter chop length can be varied in length. On most other machines it cannot.

    Avaiability: In Stock
  • Kidd Bale Choppers (New)

    Bale Choppers 814, 806 and 807, Straw for Bedding and Mulching. These are a better use of material and labour with less wastage, and gives variable chop length for different poultry beddings.  Bedding and Mulching – no problem!

    Avaiability: In Stock
  • Kidd Hedge Cutters (New)

    Kidd hedge cutters have been designed with good parallel geometry to avoid obstructions and ensure good control of the cutterhead at all times. Power slew to get into those tight corners.

    [easy_media_download url="http://martinsupplies.co.uk/wp-content/uploads/2018/04/Hedge-Cutter.pdf" text="Download PDF" force_dl="1"]
    Avaiability: In Stock
  • APV AS 600 M1 | AS 900 M1 | AS 1200 M1 Tined Weeder (New)

    The all-rounder for the modern organic farm

    The 7 mm tines take care of the crucial work. Theyvare arranged in a tine spacing of 31.25 mm and inv6 rows. The main focus is on combating unwantedvweeds. While the tines sweep over the soil, the weeds,vwhich are already in threads or germ stadium, arevpulled out and deposited on the soil surface. Therevthey wither and die. This means that approximatelyv90 % of the weed germs are decimated.

    Avaiability: In Stock
  • APV MT2 M1 Implement Carrier (New)

    Simple installation of PS-devices

    The Implement Carrier MT2 M1 allows the flexible use of our Pneumatic Seeders (PS), as they do not need to be mounted directly on the pulled soil tillage implements. Only the hose routing and the dispersion plate need to be attached to the implement.

    Avaiability: In Stock
  • APV Pneumatic Seeders (New)

    The seeds are fed from the seed tank via the electrically controlled seeding shaft into the air duct. Here, the seeds are conveyed by air support through plastic hoses to the dispersion plates, and then evenly distributed close to the soil. This enables precise seeding even by windy conditions!

    Avaiability: In Stock
  • Wylie Engineering Silage Grab (New)

    4’ 8” Silage Grab (500kg capacity)

    • 1,425mm wide
    • operated by two double acting rams
    • seven kverneland 680mm straight tines
    • five 680mm curved tines

    UNLADEN WEIGHT: 220kg

    6’ Silage Grab (800kg capacity)

    • 1,850mm wide
    • operated by two double acting rams
    • nine kverneland 810mm straight tines
    • seven 680mm curved tines

    UNLADEN WEIGHT 300kg

    Avaiability: In Stock
  • Wylie Engineering Swing Trimmer (New)

    Swing Trimmer

    • 3.5m reach (1.5m Cutterbar)
    • Unique swingover enables machine to work on either sides of the tractor
    • low power requirement
    • Three-point linkage-mounting system
    • Operator friendly
    • Eliminates white finger
    • Machine Weight > 192kg
    • Cutterbar Horsepower > 15hp

     

    Avaiability: In Stock
  • Wylie Engineering Folding Grass Fork (Hardox Tines)

    This product is available in three sizes: 12ft, 14ft, 16ft

    Avaiability: In Stock
  • Biddy Attachments Waste Grabs (New)

    Features and Benefits

    The Biddy heavy duty waste grab has been developed for the agricultural, waste and recycling industries. Designed for use with telescopic handlers and wheeled loaders, the waste grabs high tensile Hardox steel material provides high strength and durability.
    The waste grab has an increased capacity due to the grab feature which reduces waste and material handling times. In addition, the bucket grab can be made with removable bolt on sides so that objects greater than the width of the bucket can be easily handled. Optional bolt on toe plates are available and will increase the service life and durability of the bucket. Other sizes, possibilities and options are available on request. i.e. light weight tractor loader version upon request.

    Avaiability: In Stock
Back to top
X