NC Engineering Rootcrop and Beetheaper Trailer
NC Offer the complete range of Rootcrop & Beetheaper Trailers. Rootcrop trailers are build standard with 4 foot sides to reduce damage to your valuable crop. Beetheaper trailers are uniquely designed to tip to 60° and with a high lift tail door to allow for high stacking of Beets.
Description
Features
- 50° Tipping angle (60° Beetheaper)
- Tandem spring suspension
- 100mm taper front to back
- Monocoque designed body
- Sprung Drawbar
- Hydraulic Brakes
- Galvanised Front Ladder
- Full RTA approved lights
- 10-12 Tonne models fitted with 40kph axles
- 13-18 Tonne models fitted with high speed as standard
- High lift rear hydraulic door (Beetheaper Only)
Optional extras :-
- 3’6”, 4’ or 4’6” sides in-lieu of standard
- Self-locking hydraulic rear doors
- Rubber sealed door
- Hydraulic operated drop side to reduce bruising of valuable crops
- Roll over cover c/w long winding handle
- Fitted weather sheet
- Silage sides 8’ both sides
- Silage sides 7’6” low side & 8’ high side
- Hydraulically folding top side for root crop trailer
- High speed axles on 10 and 12 Ton models
- Dual air/hydraulic brakes
- Air only/hydraulic brakes
- Loadsensing
- ABS
- Hydraulic/electric brake away
- Adjustable hitch
- Swivel hitch
- Rear tow hitch c/w light socket
- Full width front window
- Lockable toolbox
- Colour to your requirements
Reviews (0)
Related products
Kane Halfpipe Dump Trailer
The new range of Halfpipe dumpers are a direct replacement for the previous wide body dump trailers. Which were a follow on from the success of the original DTM dump trailers (still produced). These Halfpipe dump trailers are mounted on a similar backbone chassis as the DTM dump and 12T Monique silage trailers, a very well proven design. The advantages of this new body design are as follows.
Kane Halfpipe Dump Trailer
The new range of Halfpipe dumpers are a direct replacement for the previous wide body dump trailers. Which were a follow on from the success of the original DTM dump trailers (still produced). These Halfpipe dump trailers are mounted on a similar backbone chassis as the DTM dump and 12T Monique silage trailers, a very well proven design. The advantages of this new body design are as follows.
NC Engineering Grain / Silage Trailer
Features
- Available in 10-20 tonne models with large cubic capacity body
- Chassis and body fabricated from high strength materials making trailer up to 15% lighter than conventional trailers, depending on model
- Extensive design work has resulted in a lower centre of gravity than other ‘half pipe’ designs. (Lower C of G than most conventional trailers)
- Heavy duty sprung suspension
- 105 kph High speed axles, with large brakes fitted across most models
- 3 mm Hardox single piece floor
- 3 mm sides single piece using high strength material
- Body tapered front to rear
- Large front window for optimum viewing of loads complete with stainless steel cover plate
- 50° tipping angle
- Full LED road lights, including twin rear clusters and LED flasher
- Hydraulic rear door complete with rubber seal and safety latch as standard
- Option of silage sides, weather sheet, Roll over cover, Grain chute, Air brakes, Load sensing, ABS system etc.
Reviews
There are no reviews yet.